甲烷部分氧化制乙炔過程研究(英文)

【摘要】：The partial oxidation of hydrocarbons is an important technical route to produce acetylene for chemical industry.The partial oxidation reactor is the key to high acetylene yields.This work is an experimental and numerical study on the use of a methane flame to produce acetylene.A lab scale partial oxidation reactor was used to produce ultra fuel-rich premixed jet flames.The axial temperature and species concentration profiles were measured for different equivalence ratios and preheating temperatures,and these were compared to numerical results from Computational Fluid Dynamics(CFD)simulations that used the Reynolds Averaged Navier-Stokes Probability Density Function(RANS-PDF)approach coupled with detailed chemical mechanisms.The Leeds 1.5,GRI 3.0 and San Diego mechanisms were used to investigate the effect of the detailed chemical mechanisms.The effects of equivalence ratio and preheating temperature on acetylene production were experimentally and numerically studied.The experimental validations indicated that the present numerical simulation provided reliable prediction on the partial oxidation of methane.Using this simulation method the optimal equivalence ratio for acetylene production was determined to be 3.6.Increasing preheating temperature improved acetylene production and shortened greatly the ignition delay time.So the increase of preheating temperature had to be limited to avoid uncontrolled ignition in the mixing chamber and the pyrolysis of methane in the preheater. 【作者單位】： Beijing
【關鍵詞】： partial oxidation fuel rich flame acetylene methane detailed chemical mechanism
【基金】：Supported by the National Natural Science Foundation of China(20976090) the Foundation for the Author of National Excellent Doctoral Dissertation of China(200757)
【分類號】：TQ221.242
【正文快照】： 1 INTRODUCTION Acetylene(C2H2)is a highly reactive,commer- cially important hydrocarbon used in metalworking and chemicals manufacture[1].There are advantages to the use of acetylene in the chemical industry be- cause a variety of valuable products can b

您可以在本站搜索以下學術論文文獻來了解更多相關內容

甲烷部分氧化制乙炔過程研究(英文)    劉業飛;王鐵峰;李慶勛;王德崢;

檸檬酸鎳制備金屬鎳纖維熱分解過程研究    楊曉嬌;劉穎;李軍;張曉燕;

葡萄糖醛酸內酯結晶過程研究    趙曉昱;沙作良;朱亮;

酶解液過濾過程的強化及新型水平帶式真空過濾機的應用    王士勇;都麗紅;鄧伯虎;馬曉宇;武娟;

美國生物技術產業集群創新及對我國的啟示    鄭曉奮;

“第六屆京津地區研究生膜技術論壇”在北京理工大學召開    趙之平;

中法簽署中醫藥合作協議    王淑軍

秸稈制乙醇新技術突破成本關    解小如

殼牌加快生物燃料研發商用    安蓓 張藝

多孔介質干燥理論與應用并行    中國農業大學工學院 劉相東

中法簽署中醫藥合作協議    胡波

中法將在中醫藥領域廣泛合作    文雪梅

中法簽訂政府間中醫藥合作協議    厲秀昀

高穩定性陶瓷透氧膜及膜過程研究    占閩川

均相茂金屬體系催化苯乙烯間規聚合過程研究    范榮

聚合物膜中水蒸氣滲透行為及脫濕過程研究    劉麗

羥丙基甲基纖維素溶液及凝膠模板作用下的礦化過程研究    趙瑾

鹽酸大觀霉素溶析結晶過程研究    鮑穎

苯乙烯-N-苯基馬來酰亞胺耐熱樹脂制備及其反應擠出過程研究    劉赫揚

在池沸騰和流動沸騰裝置中處理表面上硫酸鈣結垢過程研究    任曉光

鹽酸帕羅西汀結晶過程研究    任國賓

氫化可的松結晶過程研究    陳建新

7-氨基頭孢烷酸反應結晶過程研究    王水

八甲基環四硅氧烷的等離子體聚合過程研究    劉益民

甲烷部分氧化制含氧化合物的研究    劉念

甲烷部分氧化反應的密度泛函研究    彭勃

基于Gibbs自由能最小法的反應過程優化設計的研究    李國棟

植物甾醇結晶分離精制過程及酯化反應過程研究    黃一波

甲烷氧化酯化制醋酸甲酯新合成工藝研究    李崇

有機溶液的納濾過程研究    羅利華

茂金屬催化苯乙烯間規聚合過程研究    栗偉

共沸精餾及微波加熱酯化過程研究    陀雄信

聚合物微流控芯片脫模過程研究    楊帆